Thursday, February 25, 2010

Propeller Arcade: Finished!


The Propeller Arcade is finally finished!

The new marquee was installed today giving the unit the final touch!
Complete photos, etc have been uploaded here.

In the meantime here's a quick run down on the changes made from when the unit arrived in October of last year (pictured on the right).

* Removed the broken arcade monitor and replaced it with a 19" television. (I've learned through this experience that the next arcade box I do will use an LCD monitor.)

* Added two buttons to the arcade panel, as well as had it sanded down and painted.

* Added the Propeller itself with games running as binaries from the SD card.

* Removed the Zookeeper marquee and replaced with Propeller Arcade Marquee. (Thanks to Jeff Moomaw of Johnson Hardware and Ron at Lettergraphics!)

* Rewired the controls to operated with both Atari and Nintendo Interfaces.

* Added a PC power supply to power both Marquee and the Propeller.

* Added two switches behind the coin return buttons which turn on/off the screen as well as reset the Propeller, returning it to it's menu.

All in all a great project. It was expected to be done in three weeks, instead took three months.

OBC

Thursday, February 18, 2010

Propeller Arcade Gets a new Brain.

A package arrived this morning from Gadgetgangster.com containing a new Propeller Platform Module and Platform El Jugador Module. The Propeller Platform Module is an Open Source Propeller alternative to the Arduino, without all that silliness weird offset pin plugs. The El Jugador is a new gaming module or "shield" if you will that plugs into the top of the Propeller Platform giving you audio/video, SD, and two NES interfaces.

While I had already built my own version of this board for the Arcade, this combination gives me a professional look as well as make things easier for others who may want to follow in these footsteps. Both modules were well documented and only took a couple hours to build total. The quality of the kits are on par with the high standards I see from Parallax as well.

Another addition to PropArcade is the addition of two switches mounted behind the coin returns. One activates the power on/off switch of the television, the other is tied to the RESET pin of the propplug connector on the Platform Module.

At this point I have completely closed the Propeller Arcade, but won't be posting a final video until the new marquee artwork returns early next week. The family has already accepted this new member of our family with trips to the workshop to play Boulderdash, Hero, or Defender.

Stay tuned for a final video update next week!
OBC

Saturday, February 6, 2010

Propeller Arcade: Control Panel Finished!



The newly painted control panel arrived from the paint shop yesterday just in time for 12" of snow on NE Ohio! I spent the day installing the controls and wiring. It works great!

All that is left for the Rropeller arcade is some new graphics and cleanup!

Here's some video of it in action!